I completely stripped the engine sectioned it, Cleaned and bead blasted it and then applied several coats of primer paint and lacquer. I then reassembled it in such a way that it can be revolved by the cranking handle all the internals can then be seen working, I have included the flywheel. As the handle is turned the crankshaft goes round which drives the con rod and piston up and down the cylinder. The inlet, exhaust and transfer ports can all be easily seen.
The piston has been carefully cleaned to remove the carbon. It makes a fascinating and very different instructional / educational / unusual desk toy that catches peoples eye. (everyone who sees it cant resist turning the handle).I have mounted this one on a black wooden base which sets the engine off nicely and adds protection for any surface it stands on. It will be delivered via a tracked and insured courier. I do try and keep a few cut away engines listed however my stock is constantly changing and each engine I section turns out differently so if you see an engine you like, you know what to do. Approximate dimensions are as follow Depth 18 cm including handle Width 17.5 cm. Weight 1.65 kg (un-packaged). Please feel free to ask any Questions. This item is in the category "Antiques\Science/Medicine\Scientific Instruments". The seller is "truckdoctor0" and is located in this country: GB. This item can be shipped to United Kingdom, North, South, or Latin America.